A look at the Drillmec rig HH220 operated by Cuadrilla

0
963
Cuadrilla

DRILLMEC HYDRAULIC DRILLING RIG MODEL HH220 FA

Semitrailer mounted high mobility rotary drilling & workover rig Drillmec HH220 FA Full Automatic and fully
hydraulic operated.
The rig and its accessories are designed to operate in climate temperatures from -20°C to +40°C and are
designed to satisfy the requirements of API RP 500.
Technical data

• Drill pipe stands handling Range 3 (single) and range 3 casing
• Max pull 200 metric ton (440,000 lbs)
• Max pull down 20 metric ton (44,000 lbs)
• Drilling floor height from ground level 7,710 mm (25.3 ft)
• Top drive stroke 16.00 m (52 ½ ft)

HYDRAULIC TOP DRIVE
Built-in Top Drive System made by DRILLMEC driven by 3 top head
hydraulic motors with max. pull up 200 metric ton (440,000 lbs), max. pull
down 20 metric ton (44,000 lbs) and max torque 3.370 daN·m (24.850
lbf·ft)

TELESCOPIC MAST
The hoisting system is based on telescopic mast fabricated in compliance
with API 4F, operating as an hydraulic hoist.
Maximum pull up is 200 metric ton (440,000 lbs), pull down20 metric ton
(44,000 lbs)

Since 1993, hundreds of Drillmec HH rigs have been deployed around the world working in extreme climates
and in difficult well conditions. The advantages of the HH  series provides in terms of drilling efficiency, safety and sustainability make it suitable for 90 percent of onshore wells.

Compared with rigs of equal power and capability, the HH Series Rigs create a smaller footprint
reducing environmental impact, making riggingup a simpler task. Major rig components are permanently mounted
to semi-trailers for fast rig-up or down for transportation between drill sites.

Drillmec
The core of drilling innovation
HH Series
Automated Hydraulic Rigs